The MF-11 performs fast, accurate leak
tests with either air or nitrogen. It utilizes our ultrafast
mass flow test method in which a constant pressure is
maintained to the test part by a precision pressure regulator.
Any make-up air that may be required — because of a leak,
after the initial adiabatic heating stabilization — is
measured by VIC’s patented mass flow sensor. Results are
indicated via digital leak readout in cc/minute. MF-11 is a low
cost system, complete and ready-to-use.
• Fast and accurate leak tests using
air or nitrogen
• The least expensive leak tester
and the simplest to set-up and operate
• Fast-Complete test cycles in
seconds
• Fast response time mass flowmeter
• Leak rate sensitivity from
1cc/minute
• Patented mass flow sensor
Options include an adjustable setpoint
with Go/No-Go indicator lights, calibrated leak orifice with
NIST calibration certificate; 220 VAC power; and a handheld
digital leak rate calibrator.
For test situations where simplicity and
minimal cost are paramount. Packaging varies with application.
