Upgrade Package Descriptions

1 Isolation Filtering System

• Ideally suited for harsh environments

• Provides superior protection for the leak detector and chamber monitoring devices while eliminating the need for expensive sintered metal filters

• Reduces high nitrogen purge requirements

• Reduces downtime and maintenance costs due to leak detector contamination and particulate exposure

• On-site installation available

2 Two Step Charge and Chamber Purge

• Provides a two step low pressure and high-pressure helium charge that will allow quick identification of large product leaks preventing helium contamination of the chamber

• Ideally suited for non-proof test applications

• Chamber purge provides an enhanced gas flow technique used to flush residual helium from the chamber and sample line after gross or fine leaks – allows immediate unaffected testing of subsequent cycles

• On-site installation available

3 Charge Cabinet Upgrade

• Provides a more accurate measurement of the product charge and evacuation pressures

• Increases quality control

• The existing part pressure transducer will be removed from the current charge cabinet and mounted on the chamber door

• VIC will replace the existing part evacuation pump and replace it with an oil-less maintenance free Venturi pump – this includes all associated piping and hardware

• All charge cabinet valves will be rebuilt

• Onsite installation available

4 Everlasting Calibration Gas Leak

• Eliminates the requirements for frequent recharges associated with larger calibrators, typically a 10-4 Atm-cc/sec gas leak and larger

• Allows a lower gas cylinder charge pressure

• Eliminates downtime and erroneous calibrations resulting from a lower calibrator charge pressure

• Pressure switch input to the existing PLC provides quality assurance that the leak standard is at the required charge pressures

• Onsite installation available

5 Dynamic Helium % Pressure Compensation

• Provides part leak rate correction based on dynamic part evacuation and helium charge levels

• Increases accuracy of quantified part leaks providing greater quality assurance

• Ideal for low pressure charge applications i.e. fuel tanks or in production environments where part volumes continually change

• Onsite installation available

6 Auto Calibration / Digital Signal Processing

• System automatically captures the background and leak standard values then calculates the accept and reject set points for go/no-go testing

• Eliminates operator dependency to correctly calibrate system improving quality control

• Provides quantified part leak rate results

• Reduces the ergonomic problems associated with manual calibration

• Onsite installation available

Information Request Form

For complete details and pricing, please contact:

Tom McNamee, Customer Service Manager

Tel 631 737 0900 ext 137

eMail TMcnamee@vicleakdetection.com


						Upgrade Package Descriptions


					1 Isolation Filtering System • Ideally suited for harsh environments • Provides superior protection for the leak detector and chamber monitoring devices while eliminating the need for expensive sintered metal filters • Reduces high nitrogen purge requirements • Reduces downtime and maintenance costs due to leak detector contamination and particulate exposure • On-site installation available 2 Two Step Charge and Chamber Purge • Provides a two step low pressure and high-pressure helium charge that will allow quick identification of large product leaks preventing helium contamination of the chamber • Ideally suited for non-proof test applications • Chamber purge provides an enhanced gas flow technique used to flush residual helium from the chamber and sample line after gross or fine leaks – allows immediate unaffected testing of subsequent cycles • On-site installation available 3 Charge Cabinet Upgrade • Provides a more accurate measurement of the product charge and evacuation pressures • Increases quality control • The existing part pressure transducer will be removed from the current charge cabinet and mounted on the chamber door • VIC will replace the existing part evacuation pump and replace it with an oil-less maintenance free Venturi pump – this includes all associated piping and hardware • All charge cabinet valves will be rebuilt • Onsite installation available 4 Everlasting Calibration Gas Leak • Eliminates the requirements for frequent recharges associated with larger calibrators, typically a 10-4 Atm-cc/sec gas leak and larger • Allows a lower gas cylinder charge pressure • Eliminates downtime and erroneous calibrations resulting from a lower calibrator charge pressure • Pressure switch input to the existing PLC provides quality assurance that the leak standard is at the required charge pressures • Onsite installation available 5 Dynamic Helium % Pressure Compensation • Provides part leak rate correction based on dynamic part evacuation and helium charge levels • Increases accuracy of quantified part leaks providing greater quality assurance • Ideal for low pressure charge applications i.e. fuel tanks or in production environments where part volumes continually change • Onsite installation available 6 Auto Calibration / Digital Signal Processing • System automatically captures the background and leak standard values then calculates the accept and reject set points for go/no-go testing • Eliminates operator dependency to correctly calibrate system improving quality control • Provides quantified part leak rate results • Reduces the ergonomic problems associated with manual calibration • Onsite installation available Information Request Form For complete details and pricing, please contact: Tom McNamee, Customer Service Manager Tel 631 737 0900 ext 137 eMail TMcnamee@vicleakdetection.com